How does Hydro-Sil work to
lower your heating costs?

FEATURING THE MOST ADVANCED TECHNOLOGY –
PROPORTIONAL WATTAGE OUTPUT
This exclusive technology greatly increases energy savings & comfort for both permanent 240V and 120V heaters.

  • Hydro-Sil is designed to use only the exact amount of proportional power on an as needed basis for each room– micro-managing wattage use.

  • 25-50% on mild days, 50-75% on colder days, 75-100% on the coldest days.

  • Most of the winter averaging 25-50% for total comfort.

  • Traditional heating systems don’t have proportional output. They are either100% on or 100% off.

  • This exclusive technology greatly increases energy savings and guarantees exact comfort. i.e. A 2000 watt (8 ft.) heater may use only 500 watts to satisfy a 70 degrees room comfort level.



    HYDRO-SIL's TEMP 1 PTS THERMOSTAT
The “brains” of Hydro-Sil technology is taking
excellent care of your energy dollars and your home comfort.
How does Hydro-Sil’s advanced technology using proportional power work for you?

(A) The temp-1 thermostat has a micro processor that is sensing moment-by-moment, room temperature and energy use of heater.

(B) Any change in temperature is immediately responded to with a small amount of proportional power - micro managing temperature and energy control within 1/2 degree.

(C) I.E. - a 2,000 watt (8ft) Hydro-Sil heater may use only 500 watts to satisfy a 70 degree room comfort level - most winter days using only 20-50% of heater capacity.

 

 

A closer look at Hydro-Sil’s heat exchange.
Featuring silicone heating fluid specially formulated
for energy saving heat retention - being energized by
Hydro-Sil’s proportional watt element.
same advanced design for both models
permanent 240v and portable 120v
 
Why is individual room control important to you?

Hydro-Sil heaters create comfort in each individual room – a central system makes heat at one point – and then transports the heat to the room via a duct or plumbing.

This central distribution of heat can be very inefficient, losing up to 40% of your heating dollars and creating uncomfortable hot and cold spots. With Hydro-Sil your family is guaranteed warm comfort WHERE and WHEN you want it at a closely controlled energy cost.

The closer you match heat input to heat lose the more energy you will save. Hydro-Sil room-to-room technology does it better than a central system.

Ducts collect dirt and allergens – mold
containments causing family health issues
– ducted air has to be constantly cleaned.

WHERE - you select the room to be heated.

WHEN - you program the time to be heated.
Savings of up to 50% on your monthly heating bills can be easily achieved
with Hydro-Sil room to room energy management programming.
HYDRO-SIL'S
INDIVIDUAL ROOM HEATING SYSTEM

TEMPERATURE and ENERGY use in each room can be monitored and
adjusted individually, giving you complete control over

COMFORT and OPERATING COSTS

Each room has different ENERGY requirements.
Each room has different COMFORT requirements.

Hydro-Sil systems monitor and control the exact room requirements
by using only the right amount of power on an as-needed basis.

The results provide TWO outstanding benefits:
1. Constant, even temperature levels for each room.
2. Dramatic savings on energy.

Central systems are traditionally designed for one output. They can’t control individual energy and comfort needs for each room. With Hydro-Sil, you can:

  • Turn up the heat in the most used rooms and be comfortable.

  • Reduce heat in un-used rooms. You can save hundreds of dollars.

  • If desired – heat all the rooms.

Heaters are manufactured in various sizes to heat any size room. Refer to selection chart.
comfort that saves money!

P.O. Box 662
Fort Mill, SC 29715
Fax: (704) 329-1753
1-800-627-9276
Please call for sizing and general questions.
---
---
--
-

Questions and Comments click here